Bayside Custom Cycles

Proud to be the Sole Australian Distributer

NEW!
Now Available in Australia

DynaCycle II Semi-Synthetic Gear Oil DynaCycle II Semi-Synthetic Gear Oil is formulated as a scientifically compounded synthesized gear lubricant. It will provide superior anti-friction, anti-wear and extreme pressure lubrication. DynaCycle II will provide superior protection to gears and bearings under the most adverse temperature conditions. It is designed for use as an all season gear lubricant replacing SAE 90 and SAE 140.     Applications For all separately lubricated clutches or gear boxes Equally suitable for gear or chain primary drive For best performance and protection when at high rpm and when severe shock loading is encountered, such as in motorcycle racing or high performance use Use when superior wear protection and shear stability is required

Features and Benefits Extreme pressure and anti-wear - Eliminates wear by chemically bonding to gear wear areas. Prevents metal-to-metal contact caused by heavy shock loads during on/off throttle operation. Low friction - Superior lubricity additives cling to metal surfaces reducing internal friction. High film strength and reduced film thickness lower internal drag and heat build-up. Viscosity stability - Prevents viscosity breakdown caused by heat and mechanical shearing action of gear teeth. Better clutch performance - Unique formulation of friction modifiers meets the most severe frictional requirements for improved grip and smooth power transfer without clutch slippage or grabbing for consistent performance. Extreme pressure agents Long lubrication life High thermal stability Leak resistant Anti-foam agents Corrosion and rust inhibitors High Timkin OK load Protects gears when level of lubrication is low Reduces fuel consumption

General Description DynaCycle II Gear Oil is a proven Semi-Synthetic temperature and friction reducing formula that will allow you to run through your gears like never before. Its ability to cool and cover your gears with a bath of oil is unique. Other gear oil only splatters. DynaCycle II gear Oil clings to your gears, making shifting smoother and delivering more power and cooling ability by drawing the heat away from the gears. This will provide you a longer lifespan for your gears and bearing.

DynaCycle II is available in 5 convenient sizes 1 quart, 1 gallon, 5 gallon, 16 gallon, and 55 gallon   AUSTRALIAN DEALERS REQUIRED Phone or email for more details

Motor Oil

Dynacycle II

Gear Oil

Dealer Info

Endorsements

FAQ